Pool Maintenance



Please note: Not all products are in-stock and may require to be ordered. Please call store for inventory details.


Please note: Not all products are stocked and may require to be ordered. Please call store for inventory details.


<< Back

Pool Maintenance IPG Stain Prevent (30-21121-11)


Stain Prevent

Item ID: (30-21121-11)
Brand: IPG

STAIN PREVENT ELIMINATES MINERALS Quality controlled formula. A mixture of water conditioners which makes pools minerals and metals inactive.Contains chelation agent. Liquid concentrate.pH 0.75. Prevents corrosion of the pool equipment. Eliminates and prevents tartar build up on the inner surfaces of the pool without affecting the pH of water.


Buy30-21121-11




Pool Maintenance IPG Terminator (30-21110-11)


Terminator

Item ID: (30-21110-11)
Brand: IPG

 When you start your pool, at springtime or during the regular season, shock treatments are required and a waiting period is necessary until the residual value has dropped to the recommended levels of 1 to 3 ppm.   

If you wish to decrease the sanitizer residual rapidly, use TERMINATOR and take advantage of your pool immediately. TERMINATOR will not affect the colouring of vinyl, cement or fibreglass pools.

Application:
To reduce sanitizer level before using your pool:
1. Test the sanitizer level. If readings are higher than 3 ppm, add TERMINATOR in small quantities (50 ml per 10,000 L of pool water) to reduce high sanitizer level back to acceptable levels 1-3 ppm.
2. Wait for 1 hour.
3. After adding TERMINATOR, check water's pH and adjust to 7.2-7.8 if necessary.

RECOMMENDATION:
Do not exceed dosage. Use in small increments and test water between additions of this product
                    



Buy30-21110-11




Pool Maintenance IPG Meta Ban (30-21335-11)


Meta Ban

Item ID: (30-21335-11)
Brand: IPG

Treats all water sources.   
A granular sequestrant that helps remove quickly water discoloration in swimming pools from the presence of metals such as manganese, iron and copper.
Can also be used to remove staining on every type of swimming pool surface due to metal.
Concentrate quality formula 
Does not alter pH and is compatible with any types of sanitizers
Do not make water cloudy   
May be used for the whole season with all types of filters:
Sand
Cartridge
Diatomaceous earth filter   

Application
1. Adjust pH between 6.8 - 7.2 and let the chlorine level drop below 2 ppm.
2. For pool water discoloration, pour 150 g of METABAN per 10,000 L of pool water directly over the swimming pool surface. For stain removal, proceed to # 3.
3. Brush affected areas.
4. Add 150 g of MET ABAN per 10,000 L of pool water to a pail of water and apply the concentrated solution along the pool walls and/or in areas where staining is present. Where stains are most prevalent directly brush with the product.
5. Severe staining of surfaces may require up to 300 g of METABAN per 10,000 L of pool water.
6. Allow the circulation system to run continuously for 24 hours.
7. After 24 hours, adjust pH between 7.2 - 7.8 and alkalinity between 80 - 120 ppm.
8. Do not superchlorinate water for at least 72 hours.
9. Continue to use METABAN on a weekly basis to prevent the reoccurrence of staining of swimming pool surfaces or water discoloration.



Buy30-21335-11




Pool Maintenance IPG Skin Silk (30-21045-02*)


Skin Silk

Item ID: (30-21045-02*)
Brand: IPG

Product Variations
30-21045-02
Skin Silk - 2kg
30-21045-07
Skin Silk - 7kg


SKIN SILK softens water and improves bather comfort.
It is a selected pool product combined with aromatherapy so as to enhance water quality.
SKIN SILK is compatible with pool sanitizing chemicals and increases their efficiency.
Balanced pH formula that won't affect pool water parameters.
Makes pool water crystal clear.
AROMATHERAPY.
Increases sanitizer efficiency.
Produces water softness. 

Application
1. For initial treatment in early season add 1. 5 kg of SKIN SILK per 10,000 L of pool water. Add the required quantity in 2 applications at 4-hour intervals.
2. Sprinkle lightly above the water return, not into the skimmer.
3. To adjust the SKIN SILK level during the season
(mid-July), add 1.5 kg of SKIN SILK per 10,000 L of pool water. Add the required quantity in 2 applications at 4-hour intervals.
4. Check water pH after application and adjust between 7.2 and 7.8 if necessary.           



Buy30-21045-02*




Pool Maintenance IPG Degreaser | Dégraissant (30-21175-04)


Degreaser | Dégraissant

Item ID: (30-21175-04)
Brand: IPG

Pool liner degreaser


Buy30-21175-04




 

More online client services than any other Pool/Spa Dealer

Discover Now