Pool Sanitizers
Please note: Not all products are in-stock and may require to be ordered. Please call store for inventory details.
Please note: Not all products are stocked and may require to be ordered. Please call store for inventory details.
<< Back
Bromine Tablets
Item ID: (30-21055-17*)
Brand: IPG
Product Variations
30-21055-17
Bromine Tablets - 1.7kg
30-21055-04
Bromine Tablets - 4kg
30-21055-07
Bromine Tablets - 7kg
30-21055-13
Bromine Tablets - 13kg
30-21055-18
Bromine Tablets - 18kg
BROMINE TABLETS bromine tablets is a safe and
effective slow dissolving bactericide, algaecide and disinfectant that, unlike other
commonly used chemicals, performs well over a broad pH range.
Use
the dosages recommended below to keep your pool sparkling clean and inviting.
CONTROLS BACTERIA AND ALGAE in Swimming Pool Water.
NO CHLORINE ODOR.
1. If using an
automatic feeding device, fill the chamber(s) with tablets and adjust flow rate
according to manufacturer’s recommendations to maintain proper bromine
residual. Automatic brominators have use specific instructions peculiar to their
design. Frequently, a brominator must be filled to capacity, while the adjustments
allow the user to erode only the amount of BROMINE TABLETS bromine tablets
necessary for proper disinfection as suggested below. The slow dissolving nature
of the product combined with the design features of the brominator require that a
greater amount of chemical be exposed to the water.
2. Initially,
superchlorinate pool water, to build an initial free chlorine of 1.0 to 2.0 ppm, by
adding 30 g of predissolved shock treatment per 10,000 L of water. If using an
automatic feeding to set up the bromine reserve, adjust the feed rate at maximum.
When the recommended rate is reached, adjust the brominator at required level to
maintain the available free bromine at recommended values.
3. Add 1
or 2 tablets per 10,000 L of pool water as needed to maintain a bromine residual of
1-3 ppm at all times. Daily usage should be approximately 25 g of BROMINE
TABLETS bromine tablets per 10,000 L of pool water.
4. Periodic
superchlorination of pool water is recommended. Follow label instructions of
superchlorination product being employed.
Maintain recommended daily
levels as determined by testing kit.
Free available bromine:
1.0 – 3.0 ppm
pH: 7.2 – 7.8
Total alkalinity: 100-150
ppm
Calcium hardness: 200-300 ppm
GUARANTEE:
1-Bromo-3-Chloro-5,5-
Dimethyl Hydantoin 95%
Available Bromine Content 63%
Available Chlorine Content 31%
Buy30-21055-17*
Aqua Foot
Item ID: (30-21256-06*)
Brand: IPG
Product Variations
30-21256-06
Aqua Foot 6KG
30-21256-10
Aqua Foot 10KG
AQUA FOOT
STABILIZED
CHLORINATING TABLETS
CONTROLS BACTERIA
AND ALGAE in Swimming Pool Water.
1. Maintain
recommended daily levels as determined by testing kit. Free available chlorine:
1.0- 3.0 ppm pH: 7.2- 7.8 Total alkalinity: 100 - 120 ppm Calcium hardness: 200 -
300 ppm
2. For outdoor pools, chlorine residuals can be protected from
destruction by sun’s rays by adding 300 g of stabilizer (cyanuric acid) per 10,000 L
of pool water to yield the required initial concentration of 30 ppm.
3. If
using an automatic chlorinator, fill the chamber(s) with tablets and adjust flow rate,
according the manufacturer’s recommendations, to maintain proper chlorine
residuals. Adding pucks to the pool’s skimmer basket is an alternative chlorine feed
method. Daily usage should approximate 25 g of AQUA FOOT per 10,000 L of
pool water.
4. Periodic superchlorination of pool water is recommended.
Follow label instructions of superchlorination product being employed.
NOTE: Hot weather, heavy pool usage, and rain may require
higher usage rates to maintain proper chlorine residuals.
AQUA FOOT
contain stabilizer which can accumulate in pool water. Keep stabilizer within the
range of 30-100 ppm by dilution with fresh water.
Buy30-21256-06*
Shock Plus
Item ID: (30-21222-02*)
Brand: IPG
Product Variations
30-21222-50
Shock Plus
30-21222-06
Shock Plus 6kg
30-21222-02
Shock Plus 2kg
30-21222-10
Shock Plus 10kg
30-21222-11
Shock Plus 1kg
Size 6Kg
Also comes in 2Kg or 1Kg
SHOCK PLUS
EXTRA FINE FAST
DISSOLVING
CHLORINATING GRANULES
CONTROLS BACTERIA AND ALGAE in Swimming Pool Water
EXTRA FINE FAST DISSOLVING
1. To minimize
bleaching of vinyl liners, pre-dissolve required amount of SHOCK PLUS in a plastic
pail with concentration not exceeding 1 kg per 10 L of water. Always add chemical
to water, NEVER water to chemical. Add resulting slurry directly to pool water.
2. Initially, superchlorinate pool water with 150 g of SHOCK PLUS per
10,000 L of pool water. For best results, superchlorinate at dusk.
3.
Maintain proper chlorine residual by adding daily over the pool’s surface, 30 g of
SHOCK PLUS per 10,000 L of pool water, or as needed. NOTE: Hot weather,
heavy pool usage and rain may require higher usage rates to maintain proper
chlorine residuals.
4. Superchlorinate weekly using 150 g of SHOCK
PLUS per 10,000 L of pool water when average daily temperature is 25°C-32°C.
Otherwise, superchlorinate every other week.
5. For visible algae,
super-chlorinate using 350 g of SHOCK PLUS per 10,000 L of pool water. Heavy
algae infestation may require dosages up to 500 g per 10,000 L. Vacuum pool
when dead algae settles.
Buy30-21222-02*
Maxi Pucks
Item ID: (30-21240-07*)
Brand: IPG
Product Variations
30-21240-06
Maxi Pucks 6kg
30-21240-07
Maxi Pucks 7kg
30-21240-01
Maxi Pucks 11kg
30-21240-11
Maxi Pucks 1kg
30-21240-04
Maxi Pucks 4kg
Size 7kg
MAXI PUCKS
STABILIZED
CHLORINATING TABLETS
CONTROLS BACTERIA
AND ALGAE in Swimming Pool Water.
1. Maintain
recommended daily levels as determined by testing kit. Free available chlorine: 1.0
– 3.0 ppm pH: 7.2 – 7.8 Total alkalinity: 80 – 120 ppm Calcium hardness: 200 –
300 ppm
2. For outdoor pools, chlorine residuals can be protected from
destruction by the sun’s rays by adding 300 g of STAB/COND per 10,000 L of pool
water to yield the required initial concentration of 30 ppm.
3. If using an
automatic chlorinator, fill the chamber(s) with MAXI PUCKS and adjust flow rate
according to manufacturer’s recommendations to maintain proper chlorine
residual. Adding tablets to the pool’s skimmer basket is an alternative chlorine feed
method. Daily usage should approximate 25 g of MAXI PUCKS per 10,000 L of
pool water.
4. Periodic superchlorination of pool water is recommended.
Follow label instructions of T.N.T.
NOTE: Hot weather,
heavy pool usage and rain may require higher usage rates to maintain proper
chlorine residuals.
MAXI PUCKS contains cyanuric acid stabilizer which
can accumulate in pool water. Keep stabilizer within the recommended range of
30–100 ppm by dilution with fresh water. The ideal range is 30-50 ppm.
Buy30-21240-07*
Oxy Pro
Item ID: (30-21330-11*)
Brand: IPG
Product Variations
30-21330-11
Oxy Pro - 1kg
30-21330-02
Oxy Pro - 2kg
30-21330-07
Oxy Pro - 7kg
OXY PRO
SHOCK TREATMENT
30-21330
Quick acting.
Chlorine Free.
Completely soluble.
Swim in 15 minutes.
OXY
PRO performs effectively as a shock treatment in reducing organic contamination
of swimming pool water.
Eliminates chlorine smell and reduces skin and
eye irritation.
This oxidizing and reactivating treatment restores pool
water clearness and ensures longer lasting chlorine power.
Ideal as
initial treatment at the start of the season followed by the use of a disinfectant.
1. Add every week 120 g of OXY PRO per 10,000 L of
pool water.
2. Add required amount, sprinkling directly onto surface of
the water or pouring the product into the skimmer while the filter is running.
3. Wait for 15 minutes before swimming.
NOTE:
Add product preferably at night or when pool is not in use. Higher doses may be
required in hot weather, after rain or when pool is used heavily
Maintain recommended daily levels as determined by testing kit.
Free available chlorine: 1.0 – 3.0 ppm
pH: 7.2 – 7.8
Total alkalinity: 80 – 120 ppm
Calcium hardness: 200–300
ppm
Buy30-21330-11*
Chlor Gran
Item ID: (30-21200-18*)
Brand: IPG
Product Variations
30-21200-18
Chlor Gran 18Kg
30-21200-02
Chlor Gran 2Kg
30-21200-08
Chlor Gran 8Kg
Sizes: 2kg, 8kg and 18 kg
STAB CHLOR GRAN
STABILIZED
CHLORINATING GRANULES
CONTROLS BACTERIA
AND ALGAE in Swimming Pool Water
1. For outdoor
pools, chlorine residuals can be protected from destruction by the sun’s rays by
adding 300 g of STAB/COND per 10,000 L of pool water to yield the required initial
concentration of 30 ppm.
2. Maintain proper chlorine residual by adding
daily over the pool’s surface, 40 g of STAB CHLOR GRAN per 10,000 L of pool
water, or as needed.
1. NOTE: Hot weather, heavy pool usage and rain
may require higher usage rates to maintain proper chlorine residuals.
2.
Periodic superchlorination of pool water is recommended. Follow label instructions
of T.N.T.
3. STAB CHLOR GRAN contains cyanuric acid stabilizer which
can accumulate in pool water. Keep stabilizer within the recommended range of
30-100 ppm by dilution with fresh water.
4. While STAB CHLOR GRAN
can be used for superchlorination by using 180 g per 10,000 L of pool water, care
must be taken to avoid excessive accumulation of stabilizer.
Maintain proper daily levels as determined by testing kit.
Buy30-21200-18*
Zap
Item ID: (30-21350-30*)
Brand: IPG
Product Variations
30-21350-30
Zap - 300g
30-21350-60
Zap - 600g
ZAP
CLARIFIER - OXIDIZER –
REACTIVATOR
30-21350
Technology for
tomorrow.
ZAP actively destroys the organic residue in your pool water.
It is an oxidizing and a clarifying treatment in one.
ZAP
accelerates the elimination of organic contaminants in pool water.
This
re-activating treatment restores water's sparkle.
One
pouch treats up to 54,000 L of pool water.
1. Place filter into filtration
mode. Add a full pouch (300 g) per treatment by sprinkling ZAP around the pool,
directly on the surface of pool water.
2. If water temperature is below 20
oC dissolve ZAP in a pail of lukewarm water before adding to the pool water.
3. Wait 20 minutes before using pool.
Use ZAP
weekly to keep water crystal clear.
Maintain daily levels identified in the
directions for use of the swimming pool sanitizer being used, as determined by
testing kit.
Buy30-21350-30*
Pool Fix
Item ID: (30-21216-30)
Brand: IPG
Pool Fix - 300g pack
Buy30-21216-30
Micro Pucks
Item ID: (30-21245-04*)
Brand: IPG
Product Variations
30-21245-02
IPG Micro Pucks 2kg
30-21245-04
IPG Micro Pucks 4kg
Micro Pucks
Buy30-21245-04*
Chlor Liquid
Item ID: (30-07015-36)
Brand: IPG
Chlor Liquid
Buy30-07015-36
More online client services than any other Pool/Spa Dealer
Discover Now
